In offerta!
Più Venduto Dbx 223xs

Più Venduto Dbx 223xs

Il prezzo originale era: 195,00 €.Il prezzo attuale è: 78,00 €.

Pagamenti sicuri Carta, PayPal e checkout protetto
Spedizione gratuita da 78,90 € Consegna rapida in tutta Italia
Supporto rapido Assistenza su ordini e spedizioni
COD: SK0029536 Categoria: Tag:

Descrizione

DBX DBX223XS
CROSSOVER

dbx ® Crossover 223xs garantisce grandi prestazioni, basso rumore e affidabilità. La straordinaria precisione dei filtri utilizzati consente di indirizzare ai driver solo la corretta parte di spettro e permette così agli amplificatori di funzionare alle massime prestazioni senza distorsioni, garantendo al proprio sistema PA di generare un suono pulito e preciso. Ingressi Uscite Crossover Stereo Mode Mono Mode Sistema Signal-to-Noise

CARATTERISTICHE:
  • Input ConnectorsXLR (pin 2 hot)
  • Input TypeElectronically balanced/unbalanced, RF filtered
  • Input ImpedanceBalanced>50k ohm, unbalanced>25k ohm
  • Max Input>+22dBu balanced or unbalanced
  • CMRR>40dB, typically>55dB at 1kHz
  • Output ConnectorsXLR
  • Output TypeImpedance-balanaced/unbalanced, RF filtered
  • Output ImpedanceBalanced 200 ohm, unbalanced 100 ohm
  • Max Output>+21dBu balanced/unbalanced into 2k ohms or greater
  • Bandwidth20Hz to 20kHz, +/-0.5dB
  • Frequency Response< 3 Hz to> 90 kHz, +0/-3 dB
  • Signal to Noise RatioRef: +4 dBu, 22 kHz measurement bandwidth
  • Signal-to-Noise (Stereo Mode)>94dB (Low Output),>91dB (High Output)
  • Signal-to-Noise (Mono Mode)>94dB (Low Output),>93dB (Mid Output),>91dB (High Output)
  • Dynamic Range> 106 dB, unweighted, any output
  • THD+Noise< 0.004% at +4 dBu, 1 kHz; < 0.04% at +20 dBu, 1 kHz
  • Interchannel Crosstalk< -80 dB, 20 Hz to 20 kHz
  • Crossover Frequencies (Stereo Mode)Low/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)
  • Crossover Frequencies (Mono Mode)Low/Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Mid/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)
  • Crossover Filter TypeLinkwitz-Riley, 24 dB/octave, state-variable
  • Low cut SwitchActivates 40 Hz Butterworth, 12 dB/octave high-pass filter, one switch per channel.
  • Phase Invert SwitchInverts the phase at the output, one switch per output.
  • x1 / x10 SwitchMultiplies the low-high(mono: low/mid and high/mid) crossover frequency range of the front-panel markings by a factor of 1 or 10, one switch per channel.
  • Mode SwitchSelects stereo/mono and 2/3-way operation
  • LF Sum SwitchSelects normal (stereo) or mono-summed low frequency operation and disables Ch 2s low output phase invert LED to indicate that this output is not operational in the LF sum mode.
  • IndicatorsStereo Operation (Green); Mono Operation (Yellow); Low Cut (Red-per channel); x10 (Green-per channel); Phase Invert (Red-per output)
  • Operating Voltage100 VAC 50/60 Hz; 120 VAC 60 Hz 230 VAC50 HZ
  • Operating Temperature32°F to 113°F (0°C to 45°C)
  • Power Consumption15W
  • Power ConnectorIEC receptacle
  • Dimensioni (L x H x P):48,3 x 4,4 x 17,5 cm
  • Peso:1,7 kg

    • Prodotti correlati